exo/bpc.mitm: Add support for proper shutdown.

2025-05-27 13:14:15 -04:00 · 2019-02-21 07:05:58 -08:00 · 2019-02-21 07:05:58 -08:00 · a0e06cf7b2
commit a0e06cf7b2
parent 0288986e14
11 changed files with 727 additions and 7 deletions
--- a/exosphere/rebootstub/src/i2c.c
+++ b/exosphere/rebootstub/src/i2c.c
@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2018 Atmosphère-NX
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include "max77620.h"
+#include "i2c.h"
+#include "timer.h"
+
+/* Prototypes for internal commands. */
+void i2c_load_config(void);
+int i2c_write(unsigned int device, uint32_t val, unsigned int num_bytes);
+int i2c_read(unsigned int device, void *dst, unsigned num_bytes);
+int i2c_query(uint8_t device, uint8_t r, void *dst, size_t num_bytes); 
+int i2c_send_byte_command(unsigned int device, unsigned char reg, unsigned char b);
+
+/* Load hardware config for I2C4. */
+void i2c_load_config(void) {
+    /* Set MSTR_CONFIG_LOAD, TIMEOUT_CONFIG_LOAD, undocumented bit. */
+    I2C_I2C_CONFIG_LOAD_0 = 0x25;
+
+    /* Wait a bit for master config to be loaded. */
+    for (unsigned int i = 0; i < 20; i++) {
+        timer_wait(1);
+        if (!(I2C_I2C_CONFIG_LOAD_0 & 1)) {
+            break;
+        }
+    }
+}
+
+/* Initialize I2C4. */
+void i2c_init(void) {
+    /* Setup divisor, and clear the bus. */
+    I2C_I2C_CLK_DIVISOR_REGISTER_0 = 0x50001;
+    I2C_I2C_BUS_CLEAR_CONFIG_0 = 0x90003;
+
+    /* Load hardware configuration. */
+    i2c_load_config();
+
+    /* Wait a while until BUS_CLEAR_DONE is set. */
+    for (unsigned int i = 0; i < 10; i++) {
+        timer_wait(20000);
+        if (I2C_INTERRUPT_STATUS_REGISTER_0 & 0x800) {
+            break;
+        }
+    }
+
+    /* Read the BUS_CLEAR_STATUS. Result doesn't matter. */
+    I2C_I2C_BUS_CLEAR_STATUS_0;
+
+    /* Read and set the Interrupt Status. */
+    uint32_t int_status = I2C_INTERRUPT_STATUS_REGISTER_0;
+    I2C_INTERRUPT_STATUS_REGISTER_0 = int_status;
+}
+
+/* Writes a value to an i2c device. */
+int i2c_write(unsigned int device, uint32_t val, unsigned int num_bytes) {
+    if (num_bytes > 4) {
+        return 0;
+    }
+
+    /* Set device for 7-bit mode. */
+    I2C_I2C_CMD_ADDR0_0 = device << 1;
+
+    /* Load in data to write. */
+    I2C_I2C_CMD_DATA1_0 = val;
+
+    /* Set config with LENGTH = num_bytes, NEW_MASTER_FSM, DEBOUNCE_CNT = 4T. */
+    I2C_I2C_CNFG_0 = ((num_bytes << 1) - 2) | 0x2800;
+
+    i2c_load_config();
+
+    /* Config |= SEND; */
+    I2C_I2C_CNFG_0 |= 0x200;
+
+
+    while (I2C_I2C_STATUS_0 & 0x100) {
+        /* Wait until not busy. */
+    }
+
+    /* Return CMD1_STAT == SL1_XFER_SUCCESSFUL. */
+    return (I2C_I2C_STATUS_0 & 0xF) == 0;
+}
+
+/* Reads a value from an i2c device. */
+int i2c_read(unsigned device, void *dst, unsigned num_bytes) {
+    if (num_bytes > 4) {
+        return 0;
+    }
+
+    /* Set device for 7-bit read mode. */
+    I2C_I2C_CMD_ADDR0_0 = (device << 1) | 1;
+
+    /* Set config with LENGTH = num_bytes, NEW_MASTER_FSM, DEBOUNCE_CNT = 4T. */
+    I2C_I2C_CNFG_0 = ((num_bytes << 1) - 2) | 0x2840;
+
+    i2c_load_config();
+
+    /* Config |= SEND; */
+    I2C_I2C_CNFG_0 |= 0x200;
+
+
+    while (I2C_I2C_STATUS_0 & 0x100) {
+        /* Wait until not busy. */
+    }
+    
+    /* Ensure success. */
+    if ((I2C_I2C_STATUS_0 & 0xF) != 0) {
+        return 0;
+    }
+    
+    uint32_t val = I2C_I2C_CMD_DATA1_0;
+    for (size_t i = 0; i < num_bytes; i++) {
+        ((uint8_t *)dst)[i] = ((uint8_t *)&val)[i];
+    }
+    return 1;
+}
+
+/* Queries the value of a register. */
+int i2c_query(uint8_t device, uint8_t r, void *dst, size_t num_bytes) {
+    /* Limit output size to 32-bits. */
+    if (num_bytes > 4) {
+        return 0;
+    }
+    
+    /* Write single byte register ID to device. */
+    if (!i2c_write(device, r, 1)) {
+        return 0;
+    }
+    
+    return i2c_read(device, dst, num_bytes);
+
+}
+
+/* Writes a byte val to reg for given device. */
+int i2c_send_byte_command(unsigned int device, unsigned char reg, unsigned char b) {
+    uint32_t val = (reg) | (b << 8);
+    /* Write 1 byte (reg) + 1 byte (value) */
+    return i2c_write(device, val, 2);
+}
+
+void i2c_stop_rtc_alarm(void) {
+    i2c_send_byte_command(MAX77620_RTC_I2C_ADDR, MAX77620_REG_RTCUPDATE0, 0x10);
+    
+    uint8_t val = 0;
+    for (int i = 0; i < 14; i++) {
+        if (i2c_query(MAX77620_RTC_I2C_ADDR, 0x0E + i, &val, 1)) {
+            val &= 0x7F;
+            i2c_send_byte_command(MAX77620_RTC_I2C_ADDR, 0x0E + i, val);
+        }
+    }
+        
+    i2c_send_byte_command(MAX77620_RTC_I2C_ADDR, MAX77620_REG_RTCUPDATE0, 0x01);
+}
+
+void i2c_send_shutdown_cmd(void) {
+    i2c_send_byte_command(MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, MAX77620_ONOFFCNFG1_PWR_OFF);
+}